Welcome to Binzhou huituo chemical fiber products!
中文
中文
中文
Five point seat belts, also known as full body seat belts, are widely used in aviation, aerospace, racing, and automotive seats. They provide more restraint and protection to the human body than
ordinary three-point seat belts used in cars, making them highly favored in areas with greater impact risks to the human body.
Today, the editor will introduce the 5-step inspection method for five point seat belts:
Step 1: Check the D-shaped buckle of the seat belt grip back cushion to ensure that the webbing is not tangled together.
Step 2: Start wearing the seat belt and slide it over your arms to your shoulders. Ensure that all straps are free from tangles and hang freely. The shoulder straps must be kept vertical and not
close to the center of the body.
Step 3: Grasp the yellow leg straps with the leg straps and connect them to the buckles on the blue straps on both sides of the buttocks. Thread the excess length of webbing into the adjustment ring.
Step 4: The chest straps are connected together through a buckle with a sleeve. The chest strap must be 15 centimeters below the shoulder. Insert excess length of webbing into the adjustment ring.
Step 5: Adjust the shoulder of the seat belt: Starting from the shoulder, adjust the straps of the entire body to ensure that the height of the leg straps is just below the hips, and the D-ring on the back
is located between the two shoulder blades. Legs: Then adjust the leg straps, try doing single leg extension and half squat, adjusting the length of the straps on both sides of the legs to be the same.
Chest: The chest straps should be crossed in the middle of the chest and approximately 3 finger widths away from the bottom of the sternum.
Full body seat belts are essential protective equipment in fall protection, and workers have given them a fitting name of "life-saving belts", which proves that full body seat belts play a huge role in protecting their safety.
Everyone is familiar with seat belts, and when it comes to seat belts, they may think of car seat belts. In fact, there is another type of seat belt that is very important, which is the high-altitude work seat belt.
Five point seat belts, also known as full body seat belts, are widely used in aviation, aerospace, racing, and automotive seats. They provide more restraint and protection to the human body than ordinary three-point seat belts used in cars
According to the standard regulations, seat belts and safety ropes should be made of nylon, viscose, and silk materials, and metal accessories should be made of ordinary carbon steel. In fact, due to the low strength of vinylon material,
Firstly, let's talk about which aspects of daily life use seat belts. Firstly, in transportation such as cars and airplanes. It is mandatory to fasten seat belts during driving and during aircraft takeoff and landing.
The static load test is mainly to verify the maximum tensile force that the safety belt can withstand in a stationary state, to ensure that it can withstand the weight of the operator and the possible impact force in actual use.
